A/D Conversion Error*
Configuration - Mapping
Select One DestinationHELP
Instrument Setup:
Network:
Word:
Bit:
Control:
Scratchpad:
Select Sources
NOTE: Please be aware that there are default functions for the 5 I/O card inputs HI5.0-HI5.4 listed under Control. If you map the switch inputs to another function without setting "Use Default I/O" (located in the configuration instrument setup menu) to NO, then you risk causing an unintended action with your inputs. Please read the manual concerning default input values.
Network:
Word:
Bit:
Process Data:
Control:
Scratchpad:
Operators: equal and or not comma

Map:
Click here for a list of mapping symbols. Click here for a technical paper on mapping.
HFO20=+HFI1, HFO21=+HFI0, IFO1=+PFI0, IFO5=+PFI2, IFO6=+PFI4, HSO3=+PSI6, PFO0=+HFI0, PFO2=+HFI7, PFO4=+HFI1, PSO6=+HSI2, PSO7=+HSI4, PSO8=+HSI3, HSO2=+PSI7, PFO10=+HFO8
Click here for an expanded map

HFO - Float Variables
The 8 Float Variables (HFO0-HFO7) are saved in non-volatile memory, and can be entered below:
0: 1: 2: 3:
4: 5: 6: 7:

Home - Operation - Configuration - HI 4000 Series Online Support Site

Hardy Process Solutions
San Diego, California, USA
Tel. +1 (858) 278-2900 ▪ (800) 821-5831
Fax +1 (858) 278-6700
www.hardysolutions.com ▪ hardyinfo@hardysolutions.com
hardysupport@hardysolutions.com

homeoperationconfigurationhardy