Configuration- Options - Analog Output
A/D Conversion Error*

Slot 0
Chan 1 (Voltage output)V LOW:V HIGH:Low Value:High Value:
Chan 2 (milliamps)I LOW:I HIGH:Low Value:High Value:
Chan 3 (Voltage output)V LOW:V HIGH:Low Value:High Value:
Chan 4 (milliamps)I LOW:I HIGH:Low Value:High Value:

The setpoints HFO20...HFO23 for analog output must be set up via MAPPING.

The "loopback" values below are read back in real time from the analog output card. These values are not accurate, and are intended only for the purpose of verifying that the card is operational.

Analog Channel 1
Value(HFO20,read only)
Output(HFI2,read only)
loopback debug value 0.18 volts
Analog Channel 2
Value(HFO21,read only)
Output(HFI3,read only)
loopback debug value 4.61 milliamps
Analog Channel 3
Value(HFO22,read only)
Output(HFI4,read only)
loopback debug value 0.24 volts
Analog Channel 4
Value(HFO23,read only)
Output(HFI5,read only)
loopback debug value 4.74 milliamps
Next Page

Home - Operation - Configuration - HI 4000 Series Online Support Site

Hardy Process Solutions
San Diego, California, USA
Tel. +1 (858) 278-2900 ▪ (800) 821-5831
Fax +1 (858) 278-6700
www.hardysolutions.com ▪ hardyinfo@hardysolutions.com
hardysupport@hardysolutions.com
homeoperationconfigurationhardy